CRFs: meeting plants' demands throughout their growth cycle

From helping to create a tailored fertiliser regime for specific nursery crops to reducing fertiliser wastage, Osmocote's CRFs offer commercial growers many benefits, says ICL.

ICL Specialty Fertilizers’ technical manager Andrew Wilson
ICL Specialty Fertilizers’ technical manager Andrew Wilson

Commercial growers facing ever-increasing input costs may be pleased to learn that, according to ICL technical manager Andrew Wilson, growers "use a lot less fertiliser" when they use CRFs. "If you’re just using a water-soluble product it’s a bit of guesswork and so a lot of it is not taken up by the plant and is wasted."

He explains that while CRFs release nutrients as the plant requires them, growers using water-soluble fertilisers have to continuously apply those fertilisers throughout the year. "That would be very wasteful, very inefficient and poor for the environment because you get a lot of wastage. This waste goes into the drainage water and then eventually into the ground.

But for container nursery stock, for example, you could use a 12- to 14-month CRF product, apply it at potting and it would supply nearly all of the nutrients that the crop needs for the whole of its crop cycle."

Wilson warns that there is a lot of environmental pressure to keep water clean so: "It’s really important to fertilise plants as efficiently as possible." The EU’s Water Framework Directive stipulates that farmers and growers should do their utmost to protect the water quality across Europe by preventing nitrates from agricultural sources polluting ground and surface waters.

When should CRFs be applied?

CRFs can be mixed into the growing media or applied when nursery staff are potting up. A technique called dibbling, introduced to the horticulture industry by the Sierra Chemical Company in the 1980s, helps growers with this process as it sees the Osmocote granules placed into a hole in the growing medium and the plant placed over the Osmocote.

Wilson says: "The fertiliser will release right through the growth cycle and until you sell the plant. And you will probably still have some release left when the plant reaches the garden centre." Occasionally, water-soluble fertilisers and top dress fertilisers (such as Osmocote Topdress FT) are used in addition to CRFs, such as when a grower decides that a plant needs an extra boost towards the end of its growth cycle.

Meeting the plant’s demands

Producing high-quality plants that fly off the retail shelves or enhance a landscaping scheme is the aim of all commercial growers. For this reason, simply guessing what kind of nutrients a crop needs — and when it requires them — is perhaps too much of a risk. Wilson asserts that the primary reason for using Osmocote is that "we can advise on the exact rate of fertiliser that you need to use for a certain crop and ensure that the CRF matches the plants’ demands throughout its growth cycle. That’s what we do — we advise growers specifically on how to use the technology."

Wilson also says that ICL "develops the latest technology and tests the products and gives the best back-up in the field". He adds: "We are able to go and visit the grower, talk about the crop, talk about the release pattern and show them how it will actually release on the nursery."

Usefully, ICL has developed a precision nutrition software tool named AngelaWeb 2.0, which — by taking note of the grower’s crop type, variety, growing media, growth phase and water application methods — enables ICL’s advisers to calculate a tailored regime for a grower’s crop. "We can show them what the release will be for their crop and how it matches the plants’ demands," says Wilson.

He also divulges that other CRF products on the market are second-generation. "They will just quote the longevity, such as 5-6 months, 8-9 months or 12-14 months, but they won’t say how they are released within that period. You won’t see any graphs showing release curves or any information about the release pattern in your nursery conditions. So, when we talk about Osmocote Exact, it’s a third-generation product and as we’ve tested it before release we know exactly what the release pattern is.

"We know that they are slower at the start and then release more nutrients later in the growth phase. And when we get onto the fourth-generation product, Osmocote Exact Hi.End, we double-coat part of the granules so that we can provide lower EC levels during the first weeks of culture, due to the fact that the release at the start is slightly lower, but have more nutrients released at the end. That’s really important because it’s all about meeting the plant’s demands.

"A young plant, when it is very small, doesn’t need a lot of fertiliser. But as it grows and starts to flower, the demand for nutrients is much higher. So that’s when Osmocote Hi.End comes in and that’s where our market is moving and more growers, trying to get the best results, will use Osmocote Exact Hi.End because it’s very efficient and you get the best-quality crop." 

https://icl-sf.com/uk/


Have you registered with us yet?

Register now to enjoy more articles and free email bulletins

Sign up now
Already registered?
Sign in

Before commenting please read our rules for commenting on articles.

If you see a comment you find offensive, you can flag it as inappropriate. In the top right-hand corner of an individual comment, you will see 'flag as inappropriate'. Clicking this prompts us to review the comment. For further information see our rules for commenting on articles.

comments powered by Disqus

        

A journey through 50 years of Osmocote...

                   Related content:

1960s and 1970s

1960s and 1970s

1980s and 1990s

1980s and 1990s

2000s and 2010s

2000s and 2010s

Expert perspective: John Adlam

Expert perspective: John Adlam

Changing times: introduction of CRFs into the UK

Controlled release fertilisers: four generations of applied science and innovative technology

Controlled release fertilisers: four generations of applied science and innovative technology

As Osmocote celebrates its 50th anniversary this year, Rachel Anderson examines how the brand's continuous product development is helping commercial growers to fine-tune their crops' nutritional needs.

CRFs: meeting plants' demands throughout their growth cycle

CRFs: meeting plants' demands throughout their growth cycle

From helping to create a tailored fertiliser regime for specific nursery crops to reducing fertiliser wastage, Osmocote's CRFs offer commercial growers many benefits, says ICL.

Developing the next generation of Osmocote

Developing the next generation of Osmocote

Thanks to ICL's significant investment in research and development, growers have an increasing number of Osmocote solutions to grower challenges from which to choose.

Nursery case study: Osmocote - a "safe and consistent" choice

Nursery case study: Osmocote - a "safe and consistent" choice

Keen to tailor nutrition as closely to each crop's needs as possible, Woodlark Nursery uses Osmocote as part of the business' precision nutrition programme.

Retail plants case study: Osmocote: "It makes a huge difference."

Retail plants case study: Osmocote: "It makes a huge difference."

Nurseryman David Mills, who runs a busy plant-focused retail centre, discusses the invaluable role that Osmocote plays in producing and selling healthy plants

Case study: Nursery Patrick Morgue, based in Drôme, France

Case study: Nursery Patrick Morgue, based in Drôme, France

Osmocote fertilisers continue to provide Patrick Morgue with peace of mind in the ever-changing and fast-paced horticulture market.

Case Study: T-Y Nursery, Pauma Valley, California

Case Study: T-Y Nursery, Pauma Valley, California

To celebrate Osmocote's 50th anniversary, ICL in the USA hosted a contest to identify the nursery that had used the fertiliser the longest.

Case study: Heyne's Wholesale Nursery, Australia

Case study: Heyne's Wholesale Nursery, Australia

Established Australian grower Heyne's Wholesale Nursery uses Osmocote Exact to maximise the saleability of its stock.